A Quick and Easy Guide on Sprucing Up Your Boat Like a Pro

When it comes to traveling, boats come in handy especially when you want to get some fresh air in the middle of the ocean. However, as time goes by, boats can get dirty because of the contaminants that are present in both air and water. If unattended for long periods of time, the next thing you’ll see is your boat looking dirty that’s unpleasant to watch.

This is the time to take action to bring life back to your boat. With just a little bit of cleaning and detailing, you can return your boat to its former glory. Listed below is a step-by-step process on returning your boat back to its good condition. Let’s dive in!

Step 1 – Rinse

  • First, give your boat a splash of water to remove dirt and grime from the surface. Work your way from the top down to the bottom of your boat. A good quality hose will do, but a pressure washer is more efficient and it will make things quicker.

Step 2 – Time to Soap It Up

  • Second, time to rub some soap to eliminate hard to remove dirt and grime on your boat. Keep in mind that you should never allow soap to dry up on your boat as it will leave some unsightly streaks and damages to your boats finishing. Soap and rinse the boat one area at the time by doing this spot for now and on to another spot later on.

Step 3 – Buffing

  • Now that everything is clean, it’s time to bring back shine on your boat by buffing out the exterior surface. You can either buff it by hand or opt on using a rotary buffer to remove extra oxidation on the surface. Once done, it’s time to wax the boat by reading step number four below.

Step 4 – Time to Wax

  • Waxing not only makes your boat attractive, but it can also give extra protection to your boat’s surface against grime and any other kinds of debris. Concentrate on small areas one at a time as if you’re waxing a car. Keep in mind that there are several boat waxes available in the market that works better than the other. So choose wisely and opt for the one that’s suitable for your boat.

Step 5 – Cleaning the Interior

  • Now that we’re done with the boat’s exterior, never forget to work with the interior too. There are some multi-surface cleaners that you can buy that can do most cleaning jobs without damaging your interior’s surface. You can also use a specialized metal polish to clean poles and any kinds of metal that are present in your boat’s interior.

So there you have it! These simple tips and tricks can make your boat looking new like just the day you bought it. By cleaning your boat regularly, this will make your boat perform best while looking attractive at the same time for the years to come.

Leave a Reply

Your email address will not be published. Required fields are marked *